Specification :
Included :
2x Transmitter (TX)
1x Receiver (RX)
2x Lavalier Microphone (With Wind Muff)
2x Furry Wind Shield
1x 3.5mm TRS Camera Cable
1x 3.5mm TRS Cable for Smartphones
1x Two-in-One USB Type-C Charging Cable
1x Carrying Bag
1x Eject Pin
1x Manual Book
1x Kartu Garansi Resmi
Disclaimer : Pabrik dapat sewaktu-waktu mengubah kelengkapan ini, dan mungkin saja menyebabkan perbedaan antara yg tercantum di atas dengan content yg Anda terima sewaktu Anda membelinya.
The SYNCO G2(A2) is the best budget wireless lavalier microphone system of the 2nd-generation G series which, similar to SYNCO G1, also comes in 2 forms, 1-to-1 G2(A1) and 1-to-2 G2(A2). The new wireless microphone comes from G1(A2) and is reborn with a display to show all main indicators. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. With 1 receiver and 2 transmitters, G2(A2) is a dual channel wireless microphone system for recording two sound sources at the same time in particular, and is the best budget microphone for a wide range of content creation applications.
SYNCO wireless lavalier microphone G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
The SyncoderTM Encrypted Transmission Algorithm 2.0 enhances the signal stability of the digital microphone system within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
The Digital Signal Processor (DSP) chip in the best microphone optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.
The 3-in-1 charging solution allows the charging of this lavalier microphone system (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.
A button is set to mute the microphone system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions.
Mobile content creators would like the pocket-sized small microphone. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios.
Transmitter (TX )
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Frequency Response | 20Hz-20KHz |
| Working Distance | 492ft/150m (LOS area) 164ft/50m (NLOS area) |
| Mounting | Pocket Clip |
| Audio Input | 1/8" / 3.5mm TRS Mic Input |
| Audio Input Level | 1V (0dBV) |
| Power Requirements | 3.3V-4.7V |
| Battery Type | Built-in Lithium Battery, 500mAh |
| Battery Charging Time | 1.5h |
| Battery Life | 8h |
| Display | TFT Screen |
| Dimensions | 52×42×17mm |
| Material | Plastic |
| Weight | 39g |
Receiver (RX)
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Approximate RF Sensitivity | -81dBm |
| Working Distance | 492ft/150m (LOS area) 164ft/50m (NLOS area) |
| Mounting | Pocket Clip |
| Number of Audio Channels | 2 |
| Audio Output | 1/8” / 3.5mm TRS Mic Output 1/8“ / 3.5mm TRS Headphone Output |
| Gain | 0-5 Level |
| Audio Output Level | Line Out: 1V; Monitoring: 25-30mW |
| Power Requirements | 3.3V-4.7V |
| Battery Type | Built-in Lithium Battery, 500mAh |
| Battery Charging Time | 1.5h |
| Battery Life | 8h |
| Display | TFT Screen |
| Dimensions | 52×42×17mm |
| Material | Plastic |
| Weight | 39g |
Microphone
| Form Factor | Built-in/External Mic |
|---|---|
| Sound Field | Mono |
| Polar Pattern | Omnidirectional |
| Frequency Range | 50Hz-20KHz |
| Sensitivity | -40dB (±3 dB, re 1V/Pa at 1KHz) |
| Max. SPL | 135dB SPL (at 1KHz) |
_6.jpg)
