Specification :
The SYNCO G1T or G1L high-quality mini microphone wireless at 2.4GHz bandwidth is a line well combining sound recorder with voice changer. It provides two separate connectors, Type-C for Android mobile devices and Lightning for Apple ones. Both are capable of making audio girly, deep, reverberate or electronic, in addition to the SYNCO inherent quality sound that could be seen by the in-ear monitoring system.
The SYNCO G1T/G1L feature different connectors, Type-C (G1T) for Android smartphones and tablets as well as modern desktop and laptop computers, and Lightning (G1L) a mini wireless microphone for iphone® and other iOS devices.
The electronic pogo pins facilitate quick connector change and provide smooth transmission between receiver and mobile devices.
* Type-C or Lightning connector is separately available for sale - users could buy one as an extension or backup to the kit in hand.
The SYNCO G1T/G1L microphone voice changer pioneers the industry by combining sound recording with voice changing.
A button on the receiver end would activate the inbuilt Vocal Processing Chip once pressed, a move to trigger 9 creative voice effects packed in this small wireless microphone, including Original, Studio FX, KTV FX, Voice Amplification, EDM (Electronic Dance Music), Baby FX, Male to Female, Female to Male and Monster FX.
Even in 150m/492ft clear line-of-sight distance, the signal transmission between receiver and transmitter stays secure, stable, and smooth, a result of
the upgraded SyncoderTM Encrypted Transmission Algorithm and the improved Frequency Hopping Spread Spectrum (FHSS) technique.
When signals are captured, they would be processed immediately in this mini wireless microphone for android smartphone or iPhone® via the smart DSP chip to deliver high-quality sound without any latency.
Hence, very little time would be taken to complete the post-production.
Both types of mini wireless microphones enables in-ear monitoring function thanks to the installed digital electronics and intelligent processing chip. A 3.5mm jack provides headphone output for monitoring the audio which is a mix of the sounds from both microphone (recording) and mobile devices (backgrounding).
The portable mini wireless microphone provides a Type-C port on the receiver side so that the working phone could be charged necessarily without suspending the recording activity. This removes the “Low Battery Anxiety” of mobile content creators and allows them to record whenever and wherever.
The G1T/G1L offers flexibility to control the target sound. The 150Hz low cut and 3-level gain control help restore subtle changes in sound.
The “Mute” button on the transmitter mutes the mike only so that the speaker’s voice would not be captured when there is a need of rest or pause and the live streaming could continue.
The microphone affords long-time recording. The transmitter carries a 400mAh large-capacity battery thus 8-hour filming is achievable. The battery makes this wireless microphone rechargeable in high efficiency - 50% power in 40 mins and 80% in 1 hour. The paired receiver is device-powered and needs no battery.
The G1T/G1L offers the same incredibly tiny form factor as the whole SYNCO G Series.
The receiver weighs just 12g and the transmitter 35g, making it the perfect mini microphone wireless for mobile video makers using compact smartphone rigs.
Transmitter (TX )
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Working Distance | 492ft/150m(LOS area); 164ft/50m(NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| SNR | ?75dB |
| Audio Input | 1/8" / 3.5mm TRS Mic Input |
| RF Output Power | 20dB |
| Power Requirements | 3.3V-4.7V |
| Battery Type | Built-in Lithium Battery, 400mAh |
| Charging Port | USB-C |
| Battery Charging Time | 1.5h |
| Battery Life | 8h |
| Dimensions | 52×42×16mm |
| Material | ABS |
| Weight | 35g |
Receiver (RX)
| Wireless Transmission | Digital 2.4GHz |
|---|---|
| RF Frequency Band | 2400-2483.5MHz |
| Working Distance | 492ft/150m(LOS area); 164ft/50m(NLOS area) |
| Sampling Rate | 48KHz |
| Bit Depth | 16Bit |
| Antenna | Built-in |
| Number of Audio Channels | 2 |
| Monitoring | 3.5mm In-Ear Monitoring |
| Audio Output | Lightning/ Type-C Output |
| Gain | 0-3 Level |
| Power Requirements | 5V 1A |
| Dimensions | 55X31X13mm |
| Material | ABS |
| Weight | 12g |
Microphone
| Form Factor | Built-in Mic |
|---|---|
| Sound Field | Mono |
| Polar Pattern | Omnidirectional |
| Frequency Response | 50Hz-20KHz |
| Sensitivity | -42dB (±3dB, re 1V/Pa at 1KHz) |
| Max. Input SPL | 110dB SPL (at 1KHz) |
