Synco Mic D2 Hyper Cardioid Condenser Shotgun Microphone
JPC
  jpc@jpckemang.com   021-7180487
 

Synco

Synco Mic D2 Hyper Cardioid Condenser Shotgun Microphone

Rp 3.590.000   Rp 3.490.000 Warranty: Garansi Resmi 2 Tahun
Promo :
  • Discount Rp 100.000

Periode :

Specification :

  • Hyper Cardioid Pickup Pattern
  • Solid Brass Body, High Anti-Interference
  • Extremely Low Self-Noise
  • Ultra-flat Frequency Response
  • Gold Plated XLRM Connector
  • Wide Usage Occasions
  • Included :
  • 1x Synco MIC-D2 Microphone
  • 1x MIC Holder with 3/8" Connector
  • 1x 19.7 Inches XLRM-XLRF Cable
  • 1x Windscreen
  • 1x User Manual
  • 1x Packing Box
  • 1x Kartu Garansi Resmi




Ingin cicilan 0% ? Silahkan klik :

lazada.co.id tokopedia.com blibli.com shoope.co.id bukalapak.com


The Synco Mic-D2 shotgun microphone features a hypercardioid polar pattern to deliver sharpened frontal focus and side rejection compared to supercardioid shotguns, allowing it to capture clear, quality dialogue and sound effects for independent filmmakers, videographers, and broadcasters.

The lightweight body is constructed from CNC-machined brass for improved resistance to interference and durability. The black speckle finish reduces reflectivity to ensure visual discretion during video shoots.

With strong sensitivity and high maximum SPL handling, the Mic-D2 provides robust distortion-free signal. Its circuit utilizes a built-in bass boost to enhance low-frequency detail. The microphone's XLR output and included XLR cable enable standardized hookup to mic preamps, mixers, and a variety of portable audio recorders. It is operated via 48V phantom power, so no batteries are required.

Tight Sound Pickup

Whereas traditional shotgun mics use supercardioid polar patterns, the Mic-D2 utilizes a hypercardioid pickup pattern to provide even tighter frontal focus, more attenuation at the sides, and slightly increased rear pickup, making it an ideal choice for recording in indoor or outdoor environments.

The Mic-D2's circuit employs a built-in bass boost to enhance the detail of low-frequency sources, lending its tone to complement sound effects as well as dialogue.

48V Phantom Powered

With its balanced 3-pin XLR output and 48V phantom powering, the Mic-D2 can be used with an array of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders. The XLR connector's gold-plated contacts improve conductivity to maintain the integrity of your signal.

Ideal for Boompole Mounting

Lightweight and nearly 10" long, the Mic-D2 is well suited for use on a boompole or mic stand. It includes a mic holder with 5/8" and 3/8" options for mounting versatility.

Windscreen Minimizes Wind Noise

The Mic-D2 includes a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners.
Microphone
Form FactorStand/Boom Mount
Sound FieldMono
Operating PrinciplePressure Gradient
Capsule1 x Electret Condenser
Polar PatternHypercardioid
OrientationEnd Address
CircuitrySolid-State
PadNone
High-Pass FilterNone
Tone AdjustmentNone
IndicatorsNone
On-Board ControlsNone
WindscreenFoam (Included)
Performance
Frequency Range20 Hz to 20 kHz
Maximum SPL130 dB SPL (1 kHz, 1% THD)
Impedance450 Ohms ± 20% at 1 kHz
Sensitivity-32 dBV/Pa at 1 kHz
Dynamic Range117 dB (1 kHz, at Max SPL)
Signal-to-Noise Ratio80 dB (1 kHz)
Connectivity
Output Connectors (Analog)1 x XLR 3-Pin Male (on Mic)
Power
Operating Voltage48 V (Phantom Power)
Operating Current Consumption2 mA
Physical
ColorBlack
Mounting3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)
Construction MaterialBrass
Dimensionsø: 0.75 x L: 9.84" / ø: 1.91 x L: 24.99 cm
Weight5.82 oz / 165 g
Packaging Info
Package Weight1.685 lb
Box Dimensions (LxWxH)17.1 x 6.7 x 2.9"
Video not available.
NEW REVIEWS

Related Products and Accessories