Specification :
Disclaimer : Pabrik dapat sewaktu-waktu mengubah kelengkapan ini, dan mungkin saja menyebabkan perbedaan antara yg tercantum di atas dengan content yg Anda terima sewaktu Anda membelinya.
SYNCO Mic-D1 is a professional hypercardioid shotgun mic that has a 78dB SNR, CNC brass metal construction, and gold plated XLR connector. Its selectable high-pass filter minimizes unwanted noises and rumbles that are below 180 Hz. It is suitable for most professional video cameras, mixing boards, and recording devices which supply 48V phantom power, as well as those offering no phantom power such as DSLR and computer. It is sure to deliver broadcast quality sound either in the studio or on location.
Broadcast Sound Quality
SYNCO Mic-D1 is a professional broadcast microphone designed for video production and broadcast audio acquisition. Its 78 dB signal-to-noise ratio (SNR) guarantees better audio signal transmission.
48V Phantom Power/ AA Battery
Having a gold-plated 3-pin male XLR connector, Mic-D1 runs on 48V phantom power supplied by most professional video cameras, mixing boards, or recording devices. It is also powered by one AA battery over 100 hours, ideal for DSLR, computers, and other devices that don’t offer phantom power.
Hyper-cardioid Pattern
As a hyper-cardioid shotgun microphone, Mic-D1 with high sensitivity of -32dB (±2dB) focuses on picking up rich detailed sound right in front of it and rejects sounds coming from side and rear.
CNC Brass Metal Construction
Made of instrument-grade brass, broadcast Mic-D1 has an elegant appearance and solid construction after CNC processing. Brass material does not damp acoustic vibration and delivers a bright and clear sound tone. It also endows Mic-D1 with strong anti-interference capacity.
Selectable 180Hz High-pass Filter
A high-pass filter button on shotgun directional microphone D1 helps remove undesired low-frequency noises and rumbles at 180Hz, such as footsteps and motor noises from record players, air conditioners, blowers, etc. Using advanced sound wave interference technology, the Mic-D1 tube filters out some frequency noises too.
| Transducer | Back Electret Condenser |
|---|---|
| Polar Pattern | Hyper-Cardioid |
| Frequency Response | 40Hz to 20KHz |
| Dynamic Range | 106dB/ 91dB 11KHz at Max. SPL |
| Power Supply | Phantom Power 48V/ 1.5V AA Battery |
| Signal/Noise | 78dB (1KHz at 1Pa) |
| Sensitivity | -34dB/32dB±2dB (1dB=1V/Pa at 1KHz) |
| Max. Input SPL | 450Ω±20% (at 1KHz) |
| Output Impedance | XLRM |
| Low Frequency Roll-off | 48V DC, 2mA |
| Connector | 0.75*9.84 inches |
| Material | 165g |
| Battery Runtime | 100h |
| Dimensions | 11.22 x 0.83 inches |
| Weight | 7.3oz/207g |
