Saramonic SR-VM4 Lightweight Directional Condenser Shotgun Microphone

Improve the sound capture quality of your camera rig without draining your budget with the Saramonic SR-VM4, a camera-mount shotgun microphone offering directional sound pickup, customizable audio settings (gain and low-cut filter), and fast setup for vloggers, news shooters, and run-and-gun videographers. Additionally, it comes with a foam windscreen and a furry windshield for effective wind protection indoors and outside.

Powered by two AA batteries (available separately), the SR-VM4 can run gig after gig for up to 720 hours. Its construction features lightweight ABS material and an integrated shoe shockmount, ensuring hassle-free setup and isolation from vibration and camera noise. The attached cable has a 3.5mm TRS mini plug for simple hookup to the mic input on your camera or portable audio recorder.

Mounts on Camera

The integrated shockmount not only allows easy attachment to your camera's shoe mount, but it also provides isolation from vibration and mechanical noise. The SR-VM4 utilizes ABS construction to maintain durability while keeping weight down.

Directional Sound Pickup

Equipped with a condenser capsule in an interference tube, the SR-VM4 shotgun mic yields supercardioid polar pattern that offers focused pickup in front of the mic along with increased rejection of sound at the sides.

Attached Coiled Cable

Since the mic features an attached cable, you don't have to worry about packing a separate cable. Plus, its coiled design ensures tidy cable management. It is terminated with a right-angled 3.5mm TRS mini plug, which can be connected to the 3.5mm mic input jack on most cameras and portable audio recorders.

Powered via AA Batteries

Simply insert two AA batteries (available separately) into the mic's battery compartment to power the SR-VM4 for up to 720 hours. When the mic is on, the LED indicator will light green. If the battery power is running low, the indicator will turn red.

Onboard Gain Control

Use the gain switch at -10, 0, or +20 dB to set the mic's output level appropriately. The -10 dB setting is ideal for recording loud sources such as live music, motorsports, and close-range interviews. The +20 dB position allows you to reduce your camera's preamp level to reduce the amount of noise generated by the camera's comparatively low-quality audio circuitry.

Low-Cut Filter

The power switch also offers a position for activating the 75 Hz low-cut filter, which can increase the intelligibility of dialogue by minimizing bass buildup.

Included Wind Protection

The SR-VM4 comes with removable wind protection—a foam windscreen for indoor use and a furry windshield for outdoor shoots. Both are designed to reduce noise caused by common sources of wind.

Microphone

Form Factor	Camera-Mount
Sound Field	Mono
Operating Principle	Pressure Gradient
Capsule	Condenser
Polar Pattern	Supercardioid
Orientation	End Address
Circuitry	Solid-State
Pad	None
High-Pass Filter	75 Hz
Tone Adjustment	None
Gain Adjustment	-10 to +20 dB
Indicators	1 x Green/Red Single LED (Battery, Power)
On-Board Controls	Gain/Sensitivity, High-Pass Filter
Windscreen	Foam, Windsock/Windjammer (Included)

Performance

Frequency Range	20 Hz to 20 kHz
Impedance	50 Ohms
Sensitivity	-32 dBV/Pa at 1 kHz
Signal-to-Noise Ratio	80 dB

Connectivity

Output Connectors (Analog)	1 x 1/8" / 3.5 mm TRS Male (on Attached Cable)
Headphone Connector	None

Power

Operating Voltage	3 V (Battery Power)
Battery Type	2 x AA (Not Included)
Approximate Battery Life	720 Hours

Physical

Mounting	Camera/Shoe-Mount, Shockmount (via Integrated Hardware)
Included Case	None
Construction Material	ABS
Operating Temperature	-4 to 140°F / -20 to 60°C
Dimensions	H: 4.3 x W: 2.1 x L: 9.4" / H: 10.8 x W: 5.4 x L: 23.9 cm
Weight	4.97 oz / 141 g