Specification :
Disclaimer : Pabrik dapat sewaktu-waktu mengubah kelengkapan ini, dan mungkin saja menyebabkan perbedaan antara yg tercantum di atas dengan content yg Anda terima sewaktu Anda membelinya.
The Stereo VideoMic Pro Rycote from Rodebuilds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
Transducer | Pressure gradient |
Polar Pattern | XY Cardioid |
Frequency Range | 40 Hz to 20 kHz (selectable HPF @ 75 Hz) |
Sensitivity | -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz |
Output Impedance | 200 Ohms |
Maximum Output | +4.2 dBu (@ 1% THD into 1 kOhms) |
Dynamic Range | 100 dB |
Maximum SPL | 134 dB, max (1 kHz, 1% THD into 1 kOhms load) |
Signal / Noise | 76 dBA (A-weighted per IED651) |
Power Supply | 9 V alkaline battery |
Connection | 1/8" (3.5 mm) stereo mini-jack |
Signal to Noise Ratio | 76 dBA SPL (A-weighted per IEC651) |
Dimensions (D x W x H) | 4.5 x 3.1 x 5.3" (115 x 80 x 134 mm) |
Weight | 0.26 lb (116 g) (without battery) |
Packaging Info | |
---|---|
Package Weight | 0.6 lb |
Box Dimensions (LxWxH) | 8.5 x 5.1 x 3.2" |