Hollyland

Home
Microphones
Hollyland
Wireless

Hollyland Lark M1 Wireless Lavalier Microphone System with Charging Case Violet

~~Rp 2.265.000~~ Rp 1.520.000 Warranty: Garansi Resmi 2 Tahun

Promo :

Discount Rp 316.000
Promo Hollyland Rp 429.000

Periode :
13 - 30 November 2024

Specification :

HearClear Noise Cancellation
Charge & Store Two-in-One
Easy to Use Plug and Play Design
Tiny & Light Design
Hi-Fi Sound Quality
Stable Connection
650ft (200m) Transmission (LOS)
Wide Compatibility
Included :
1x Charging case
2x Transmitter
1x Receiver
2x Furry windshield
1x 3.5mm TRS Patch cable
1x 3.5mm TRS to TRRS Patch cable
1x USB Cable
1x Carrying pouch
1x User Manual
1x Kartu Garansi Resmi

Ingin cicilan 0% ? Silahkan klik :

[OFFICIAL] Advantages of Hollyland Lark M1

Tiny, but Mighty

Lark M1 lav microphone comes with a charging case to ensure non-stop battery life all day long. M1 microphone transmitter and receiver have a Type-C interface that supports working while charging at the same time. You no longer have to worry about low battery situations.

1. One-click Smart Noise Reduction

2. CD-level Lossless Sound Quality

3. Storage and Charging Two-in-One

4. Intelligent Device Recognition

5. 656ft Long Transmission Distance

6. Wide Range Applications


One-click Smart Noise Reduction Lark M1 lavalier microphone, adopting innovative HearClear Noise cancellation technology and DSP algorithm, takes only one click to turn on and delivers high-performance recording quality in virtually any recording environment. When turned off, it provides a richer audio ambience and a real-life sound effect.	Small & Portable Lark M1 wireless lavalier mic is super compact and lightweight, only 0.42oz and 0.4" in thickness. Designed with a built-in clip, it can be easily snapped on virtually collars. With a flat and sleek design, it's even smaller than a USB flash drive. It feel like nothing on your collar but a photogenic item.	8h Long Battery Life, Fast Charging The Lark M1 micriphone can work up to 8 hours after a full charge. In full capacity, the charging case can charge the whole set twice, and keep them working up to 20h. It takes only 1.5h to charge the TX/RX. After a short break, the device will be fully powered again. Note: Each unit has a USB Type-C port for direct charging. You can record while recharging.


650ft Long Transmission Lark M1 lapel microphone's transmission distance is up to 656ft and the delay is less than 0.08s. Automatic frequency switching when there is interference. Upgraded Bat Obstacle Avoidance 2.0 transmission technology optimizes the codec algorithm for the audio wireless baseband transmission protocol, and improves the stability of long-distance transmission by 90%.	HiFi Sound Quality, Rich Audio Details Using LC3 codec + up to 48KHZ/16bit sampling rate to achieve a sound quality beyond CD level, Lark M1 records sound for you without loss and compression. Its high sound is transparent and undistorted, and its bass is thick and magnetic. Let's make audio creation one step closer to art.	Auto Device Recognition Ready to use out-of-the-box, no tedious setting. Lark M1 mic system will automatically identify the connected device (mobile phone or camera), select working modes, and adaptive volume settings. No manual adjustment is required. Note: Manual pairing and mode switching are still supported.

Note:

1. After the receiver and microphone are fully charged in the charging case, they will automatically stop charging. When the units have not been used for a long time, the battery power will be consumed little by little. But when the charging case cover is opened again, it will be activated to detect the power of the receiver and microphone and recharge the units.

2. When the charging case is completely power off, it takes about 1.5 hours to fully charge a empty charging case without the TX/RX in it. When the charging case is fully charged, then it can charge 2 TX and RX twice.

3. The receiver and microphone can be used while charging directly via USB Type-C port.

Multiple Connection Methods


Connect to iPhones. Connect Lark M1 receiver to Android phone with a standard Lightning to 3.5mm adapter cable.(cable not included)	Connect to Android phones Connect Lark M1 receiver to Android phone with a standard Type-C to 3.5mm adapter cable.(cable not included)	Connect to the computer Connect to the camera through a 3.5 TRS to TRS patch cable.(cable included)	Connect to the camera 1. Install RX on the camera. 2. Connect to the camera through a 3.5 TRS to TRS patch cable.(cable included) Note: Set the camera recording volume to the minimum, and the RX output volume level to the middle to ensure the best recording effect.

How to switch the Working Mode of Lark M1?

1. Camera: Connect a camera to the M1 receiver, and long-press the M button on the receiver to switch to Camera Mode. Mobile Phone: Connect a mobile phone to the M1 receiver, and long-press the M button on the receiver to switch to Mobile Phone Mode.

2. Receiver: Two indicators turn green in the Camera Mode and blue in Mobile Phone Mode.