Feiyu Scorp C with Follow Focus 3-Axis Handheld Gimbal Stabilizer for DSLR Mirrorless

Included : 1x Main body 1x Feiyu Follow Focus Motor 1x Type-C to Type-C(C02) 1x Type-C to TRS2.5(T02) 1x Type-C to 2.5mm Panasonic shutter cable(DC2.5mm) 1x Type-C to Micro(A03) 1x Type-C to Multi Sony shutter cable 1x USB2.0 to Type-C 1x Tripod 1x Quick release plate 1x Camera backing base 3x Camera fixed screw 1x Lens holder screw 1x Lens holder 1x Manual Book 1x Kartu Garansi Resmi

FeiyuTech SCORP C Gimbal Stabilizer Overview

Specification

General

Name

Feiyu SCORP 3-Axis Camera Handheld Stabilizer

Demensions

314.4*210.7*240.3mm(Gimbal balancing position)
280.8*263.6*68.1mm (Gimbal folded position)

Weight

About 1200g/2.65 lb (including quick release plate, not included other accessories and camera)

Material of Main Body

Synthetic macromolecular resin,Alumninum Alloys

Payload

About 2.5kg/5.51 lb (well balanced)

Water Proof

Splash-proof

Gimbal

Stabilization

3-axis Motor

Controllable Range

Tilt:+110°~-45°
Roll:+20°~-20°
Pan:360°(Unlimited)

Rotatable Range

Tilt: 340°(With limitation)
Roll: 340°(With limitation)
Pan: 360°(Unlimited)

Extended Ports

At the bottom of the handle:

1/4 inch thread hole*1, which can mount Tripod; Below the multifunction knob: Type-C charging port*1;

In front of fixed plate:

Type-C extension port*2 to connect focus motors;

At the back of fixed plate:

Type-C camera control port*1, Type-C image transmission port*1;

In front of quick release plate:

1/4 inch thread hole*1, for installation of lens holder;

On the top of vertical cross arm:

1/4 inch thread hole*1, for installation of ARRI rosettes adaptor?

Battery

Type

Lithium Cell

Capacity

2500mAh, built-in battery cannot be removed, charge it via the USB-C port

Theoretical Battery Life

13h

Operating Voltage

6.8V-8.4V

Operating Temperature

-10°- 45°

Charging Time

About 1.6h (Using 18W fast charger)

APP

Name

Feiyu SCORP

Required Operating System

iOS 9.0 or later
Android 6.0 or later

How To Control The Camera

While connecting gimbal and cameras with cable (standard accessories for SONY, CANON, NIKON, Panasonic), users can control picture-taking/recording with shutter button and set aperture, shutter, ISO and other camera parameters (see Camera Compatibility List for more).

Motor Power Auto Tune

Use motor auto tune button or choose Auto Tune in motor power settings on APP to tune the motor power automatically according to the camera you install. Auto Tune operation: Put gimbal on the table, start the motor power tuning progress through motor auto tune button or APP,and wait for the progress complete. Gimbal will vibrate slightly while Auto Tune to weigh the camera, it’s a normal Phenomenon.

Optional Accessories

Monopod (Pay attention to its max payload)?
Carbon Fiber Extension Rod?
Feiyu SCORP Focus Motor?
ARRI rosettes adaptor?
Portrait/landscape dual-use quick release plate?
Feiyu SCORP Image Transmission Transmitter?
wireless microphone kit? wireless microphone ( transmitter terminal )*1? wireless microphone (receiving terminal)*1?wireless clip-on microphone *1?
Body-mounted Weight Support for installing flash lamp/ soft light/ Microphone and other devices via cold shoes?

Available Functions For Users

1. Change follow modes via buttons, directly show the state of camera connection, Bluetooth , battery.
2. One tap to enter Auto rotation mode (Inception mode), VLOG Selfie and portrait shooting for TikTok, and more special shooting way.
3.Switch between portrait and landscape mode.
4. Control picture taking/recording with shutter button (see Camera Compatibility List for more). 5. Initialize the gimbal when it is not level.
6. Manually set up the shooting angle on tilt axis and pan axis by hand.
7. Upgrade the firmware , set up the parameter, remote control and customize some button functions on APP.

Video not available.